Lambert Lx 24 Fi Manual English Jun 2026

| Parameter | Value | |-----------|-------| | Engine type | 4-stroke, single cylinder, OHV, EFI | | Displacement | 212 cc | | Max power | 7.5 HP @ 3600 rpm | | Max torque | 13.5 Nm @ 2500 rpm | | Fuel system | Electronic Fuel Injection (Lambert Fi) | | Starting system | Recoil (optional electric) | | Ignition | TCI with ECU control | | Recommended oil | SAE 10W-30 (above 0°C) | | Fuel consumption | ~2.0 L/hr at full load |

The Lambert Lx 24 Fi is a compact, general‑purpose power tool (or device) model — typically a multicutter/oscillating tool or small engine appliance — designed for light‑to‑medium duty workshop and home tasks. The following is a descriptive, user‑friendly manual-style guide in English covering the product’s features, operation, maintenance, troubleshooting, safety, and practical tips. Lambert Lx 24 Fi Manual English

Exhaust gases are not venting correctly. Check the flue terminal for external blockages. A technician must check the fan or pressure switch. Central Heating NTC Sensor Fault | Parameter | Value | |-----------|-------| | Engine

The system water pressure is too low (below 0.5 bar). Open the filling loop under the boiler to restore pressure to 1.2 bar. Water Circulation Failure / Pump Lock Check the flue terminal for external blockages

Switches between OFF , SUMMER (hot water only), and WINTER (heating and hot water).

: System water volume has dropped too low for safe operation, threatening the main heat exchanger.

Use the filling valve under the boiler to top up the system to 1.2 bar. Check your radiators, valves, and pipework for slow leaks if this code keeps appearing. 5. Maintenance and Safe Operation Guidelines