Xta-7000 Temperature Controller Manual Verified

light will blink until the process completes after about 3 cycles. Locking Data:

When the XTA-7000 detects an internal error or hardware issue, it displays a specific error message on the PV window. Meaning: Input sensor open-circuit or over-range error.

Determines proportional gain response. Setting this value directly to . I Integral Time

Connect the positive (+) wire to the positive terminal and the negative (-) wire to the negative terminal. Reverse wiring will cause the PV display to drop when the temperature rises.

Usability for target users

| Parameter | Symbol | Meaning | Setting Range | | :--- | :--- | :--- | :--- | | | P | Determines how the controller responds. | 0 to 40% | | Integral Time | I | Eliminates steady-state error. A larger value makes the integral action slower. | 0 to 999 seconds | | Derivative Time | D | Anticipates future error, damping overshoot. | 0 to 999 seconds | | Hysteresis (Differential) | Hy | Sets the switching differential for on/off control. | 0.2 to 20.0°C | | Process Value Bias | Pb | Corrects for sensor or system offset. | -19.9 to 19.9°C | | Control Period (T) | T | The cycle time for the control output. | 2 to 120 seconds (for relay) |