V2000-c Rfid Access Control User Manual ~repack~

Access control has evolved from keyed doors and bulky card readers to sleek, secure RFID systems that balance convenience with safety. The V2000-c is a modern RFID access control unit designed for small-to-medium businesses, multi-tenant buildings, and organizations that want an affordable, reliable way to manage entry. This post walks through everything you need to know: features, installation, setup, daily use, troubleshooting, security considerations, and smart tips to get the most from your V2000-c.

To enter programming mode, you must use the . The factory default Master Code is 999999 . V2000-c Rfid Access Control User Manual

The V2000-C is a single-door multifunction standalone access controller. It supports up to and allows access via RFID card, a 4-to-6 digit PIN, or a combination of both. Operating Voltage: DC 12V ± 10% User Capacity: 2,500 Card Reading Distance: 3–6 cm Active Current: Lock Output Load: Max 3A Operating Temperature: -45°C ~ 60°C 2. Installation and Wiring Access control has evolved from keyed doors and

If you need to configure a specific accessory with your V2000-C, let me know you are installing (e.g., Maglock, Electric Strike), if you are adding an external exit button , or if you need help with a specific programming error code . To enter programming mode, you must use the

If your V2000-c is connected to a networked access control system (such as Hanwha Techwin or AxxonSoft software), you can manage users via the software dashboard.

The master code is now safely reset back to the default 999999 .