Digital Editions
When the FANUC WN57 override function is active, users can modify the machining parameters using a dedicated override switch or button on the CNC control panel. This allows them to increase or decrease the feed rate, spindle speed, or other parameters in real-time, without having to stop the machine or modify the program. The override function can be used to:
) Enabled: The dry run function is active, replacing programmed feedrates with a uniform manual feedrate for air-cutting tests.
| Function | FANUC Signal Name | Typical Address | | :--- | :--- | :--- | | Machine Lock 1 | G104.0 | G116.0 (older) | | Dry Run | G104.7 | G116.7 | | Aux Funct Lock | G104.1 | N/A | | Handle Interrupt Mode | Input from rotary switch | Varies |
While useful for testing, this function should be disabled once debugging is complete. If left active, it can:
：具体K地址可能因不同的机床制造商或PMC程序版本而不同，K906.0仅是最常见的标准地址。在操作前， 强烈建议查阅您机床的电气说明书或FANUC系统手册以确认正确的地址 。
When the FANUC WN57 override function is active, users can modify the machining parameters using a dedicated override switch or button on the CNC control panel. This allows them to increase or decrease the feed rate, spindle speed, or other parameters in real-time, without having to stop the machine or modify the program. The override function can be used to:
) Enabled: The dry run function is active, replacing programmed feedrates with a uniform manual feedrate for air-cutting tests. fanuc wn57 override function is active
| Function | FANUC Signal Name | Typical Address | | :--- | :--- | :--- | | Machine Lock 1 | G104.0 | G116.0 (older) | | Dry Run | G104.7 | G116.7 | | Aux Funct Lock | G104.1 | N/A | | Handle Interrupt Mode | Input from rotary switch | Varies | When the FANUC WN57 override function is active,
While useful for testing, this function should be disabled once debugging is complete. If left active, it can: | Function | FANUC Signal Name | Typical
：具体K地址可能因不同的机床制造商或PMC程序版本而不同，K906.0仅是最常见的标准地址。在操作前， 强烈建议查阅您机床的电气说明书或FANUC系统手册以确认正确的地址 。