In 1 Manual | Grundig Universal Remote Control 8

| Problem | Solution | | :--- | :--- | | | Replace batteries. Check polarity (+/-). | | Some buttons work, others don’t | The remote is in the wrong mode. Press the correct device key (TV, DVD, etc.). | | Device turns on/off but no volume | You have the right code, but it might be a limited code. Repeat the Auto-Search method to find a code with full feature support. | | Remote works from 1 foot away but not 10 feet | Clean the IR sensor on the remote (top tip) and on your TV. Remove physical obstacles. | | Buttons are stuck or sticky | Remove batteries. Open the case carefully and clean the rubber membrane with isopropyl alcohol. | | Code list doesn’t have my brand | Use the Auto-Search method (Method 2). It will find it. |

Press and hold the corresponding (e.g., TV) for about 3 seconds until the power button light stays on. grundig universal remote control 8 in 1 manual

If the LED does not flash, replace the batteries. Low battery voltage is the number one cause of programming failure. | Problem | Solution | | :--- | :--- | | | Replace batteries

Press and hold the (or SHIFT ) button on the Grundig remote until the red LED indicator light stays solidly lit. Press the correct device key (TV, DVD, etc

Lost the booklet? Scroll down. We provide a generic code list methodology below.

Press the (e.g., TV ) to lock the code into memory. Method 3: Automatic Code Search