Narishige Pc10 Manual New -

Understanding the mechanical layout and electronic controls of the PC-10 is essential for precise adjustments. Mechanical Components

| Problem | Probable Cause | Remedy | | :--- | :--- | :--- | | Even if power is on, "HEATER LEVEL" does not display. | AC Power Cord is disconnected; voltage setting is incorrect; fuse is blown. | Plug cord in firmly; make correct voltage setting; check and replace fuse. | | Heater value is the same, but the pipette is different. | Heating Element is deteriorated. | Increase the heater value to compensate for loss of heat generation. | | Pipette looks distorted and off-center. | Glass capillary is not centered in the Heating Element. | Be sure the glass capillary is placed right at the center of the Heating Element. | | Heating function is inconsistent. | Heater Unit is affected by wind from AC, room temperature, and humidity. | Please place the instrument to avoid those factors as much as possible. | | The heating function is inconsistent and coils are touching. | The coils of Heating Element are in contact. | Use a wrench to separate them, or replace it with a new unit of PC-10H. | narishige pc10 manual new

Adjusts the electrical current supplied to the heater coil. | Plug cord in firmly; make correct voltage