immediately. The device should remain "unrecognized" in the Device Manager initially. Manual Driver Assignment Device Manager
Click . The utility will copy the patched FTD2XX.dll and mvci32.dll files to your system folders and inject the required 64-bit registry keys. Click Finish once the process completes. Step 4: Hardware Connection and Device Manager Check autokent mvci multi driver x64 install
Note: If you see a yellow exclamation mark next to these items, right-click them, select , choose Browse my computer for drivers , and point the directory to C:\Program Files (x86)\XHorse\MVCI Driver for TOYOTA TIS (or the installation directory created by AutoKent). Step 5: Test the Firmware Connection immediately
| Error Code | Message | Solution | | :--- | :--- | :--- | | | Unsigned driver | You forgot to disable signature enforcement. Reboot into the special startup settings. | | Code 10 | Device cannot start | USB power issue. Use a powered USB hub or change ports. Re-flash firmware. | | Code 28 | Driver not installed | Windows did not find the INF file. Manually select “Have Disk” and point to the .inf in the x64 folder. | | Device vanishes | Disconnects randomly | Bad USB cable. Replace with a shielded, short (1m) USB 2.0 cable. | The utility will copy the patched FTD2XX
For Vediamo 4.2, users have reported the following manual steps:
What (Windows 10 or 11) is your machine running? Are you facing a specific error code or behavior right now? Share public link