(Note: Sections 1–3 are often relocated to the separate Installation Manual).
The unit is designed for standard panel mounting using a mounting rack and connector assembly. Kt 70 Installation Manual
This guide outlines the technical specifications, physical installation steps, wiring configurations, and post-installation checkout procedures typically found in the KT 70 installation manual. Technical Specifications and System Overview (Note: Sections 1–3 are often relocated to the
Use high-performance low-loss foam dielectric cable, such as Electronic Cable Specialists (ECS) or PIC Wire variants. | Parameter | Description | Typical Setting |
Use low-loss coax such as Electronic Cable Specialists (ECS) or PIC wire options. Never use standard RG-58, as its loss profile at 1000 MHz is too high for aviation safety.
| Parameter | Description | Typical Setting | |-----------|-------------|------------------| | | Sensor type | K (for K-thermocouple), Pt100 | | Unit | Temperature unit | °C or °F | | OPL | Output power limit | 100% (unless limiting heater) | | AL1 | Alarm 1 setpoint | e.g., 50°C above SP | | HY1 | Alarm hysteresis | 2°C |