This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
: Flashing will wipe all personal data. Ensure you have a backup if possible.
Flashing PAC Firmware with SPD Tool | PDF | Software - Scribd
Release the boot key once the tool shows a blue progress bar. The tool will flash the system partitions sequentially. Wait for the status to change to a green message. Click the Stop button (Square icon) in the tool. Disconnect your phone and power it on. ⚠️ Critical Troubleshooting Tips Tool not detecting phone Driver issue or bad cable Reinstall SPD drivers; use a USB 2.0 port. Checking failed error Corrupted PAC file Redownload the stock firmware zip file. Stuck at "Waiting for USB" Boot key skipped Pull out the battery, hold the boot key, and re-plug. Contact Service Screen Hardware fault or bad NVRAM Reflash with a different firmware version.
Click the (Play arrow button) in the tool interface.
The specific steps can vary depending on the tool, but here is a common workflow: