Lighthouse-tx-htc-2-0-calibration-rescue-244.bin ((hot)) 【No Survey】

For most users, this file is a last-resort "miracle worker". If your base station is bricked, showing a red blinking light, or refusing to power on after a failed SteamVR update, this rescue bin is often the only thing standing between a working VR setup and a costly out-of-warranty replacement.

While the above procedure is the most common and official method, you may encounter some variations online: lighthouse-tx-htc-2-0-calibration-rescue-244.bin

If your base station is exhibiting any of these behaviors after a failed update, it is a strong candidate for the "calibration rescue" procedure. For most users, this file is a last-resort "miracle worker"

The light should turn green (or cycle through colors). The station is now recovered, and you can try updating the firmware normally through SteamVR. Troubleshooting the Rescue Process The light should turn green (or cycle through colors)

The file is a critical piece of software designed for use with Lighthouse TX devices, specifically those categorized under the HTC 2.0 series. This binary file serves a dual purpose:

Before starting, locate a standard USB-C to USB-A data cable. Do not use a cable that only supports charging. Step 1: Disconnect and Power Down

(Remember: do not run any flashing steps unless you accept the bricking risk.)