The requested URL was not found on this server.
Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request...
| Feature | Specification | |---------|----------------| | | Micro-ATX (24.4cm x 19.8cm) | | CPU Socket | LGA 775 | | FSB Support | 800/1066/1333 MHz | | Chipset | Northbridge: Intel G41, Southbridge: ICH7 | | Memory | 2 x DDR3 DIMM slots (Max 4GB or 8GB depending on BIOS) | | Expansion Slots | 1 x PCIe x16 (v1.1), 1 x PCIe x1, 2 x PCI | | Storage | 4 x SATA 2.0 (3Gb/s), 1 x PATA (IDE) | | Back Panel | PS/2 Keyboard/Mouse, VGA, 4 x USB 2.0, LAN, 3x Audio jacks | | Audio | Realtek ALC662 (5.1 Channel HD Audio) | | LAN | Realtek RTL8103E (10/100 Ethernet) |
Any CPU with 130W TDP (e.g., QX6850, QX9770) – the VRM will overheat. g41t-ad v1.0 motherboard manual
Remove all memory sticks. Wipe the gold contacts with a clean microfiber cloth. Insert a single stick into the first slot and try booting. | Feature | Specification | |---------|----------------| | |
The G41T-AD v1.0 uses an (often v02.61 or later). To enter BIOS, press Del (or F1 on some OEM builds) during POST. Insert a single stick into the first slot and try booting
| Feature | Specification | |---------|----------------| | | Micro-ATX (24.4cm x 19.8cm) | | CPU Socket | LGA 775 | | FSB Support | 800/1066/1333 MHz | | Chipset | Northbridge: Intel G41, Southbridge: ICH7 | | Memory | 2 x DDR3 DIMM slots (Max 4GB or 8GB depending on BIOS) | | Expansion Slots | 1 x PCIe x16 (v1.1), 1 x PCIe x1, 2 x PCI | | Storage | 4 x SATA 2.0 (3Gb/s), 1 x PATA (IDE) | | Back Panel | PS/2 Keyboard/Mouse, VGA, 4 x USB 2.0, LAN, 3x Audio jacks | | Audio | Realtek ALC662 (5.1 Channel HD Audio) | | LAN | Realtek RTL8103E (10/100 Ethernet) |
Any CPU with 130W TDP (e.g., QX6850, QX9770) – the VRM will overheat.
Remove all memory sticks. Wipe the gold contacts with a clean microfiber cloth. Insert a single stick into the first slot and try booting.
The G41T-AD v1.0 uses an (often v02.61 or later). To enter BIOS, press Del (or F1 on some OEM builds) during POST.