Epson-sx130-reset Adjustment Program ^hot^ Jun 2026

: Allows for prescribing or updating the print head ID after replacement.

Open the extracted folder and look for the application file named . Right-click AdjProg.exe and select Run as administrator . When the window opens, click the Select button at the top. Choose SX130 under the Model Name drop-down list.

| Problem | Likely Cause | Solution | | :--- | :--- | :--- | | Program doesn't detect printer | USB cable loose, driver conflict, or printer not in ready mode | Reinstall Epson driver, try a different USB port, restart PC | | Reset button is greyed out | You have not clicked "Read" or "Check" first | Always read the current counter before resetting | | "Communication Error" | Firewall or antivirus blocking the program | Temporarily disable real-time protection (re-enable after) | | Printer returns to error after restart | Physical pad is too saturated; counter resets but sensor? (Note: SX130 has no sensor, only counter) | Clean the pads thoroughly and reset again | | "Destination ID mismatch" | Wrong region code entered | Try common codes: 00, 01, 05, 10, 12 |