Hw 130 Motor Control Shield For Arduino Datasheet Free [2021] -

| HW-130 Function | Arduino Pin | |------------------------|-------------| | Motor A Direction 1 | D8 | | Motor A Direction 2 | D9 | | Motor A Enable (PWM) | D10 | | Motor B Direction 1 | D11 | | Motor B Direction 2 | D12 | | Motor B Enable (PWM) | D13 | | External Power Input | Vin (or separate terminal) | | GND | GND |

4.5V to 25V (supports up to 36V in some chip variants). Current Output: 600mA per channel (1.2A peak). hw 130 motor control shield for arduino datasheet free

To download the HW-130 Motor Control Shield datasheet, simply click on the following link: [insert link]. The datasheet is available in PDF format and provides a comprehensive overview of the shield's technical specifications. The datasheet is available in PDF format and

(5V) connected to Arduino’s high-resolution dedicated timers. 5.imimg.com Pin Mapping & Connectivity Ensure the polarity is correct (positive to +M,

// Motor B reverse at full speed digitalWrite(IN3, LOW); digitalWrite(IN4, HIGH); analogWrite(ENB, 255);

Connect a separate, external DC power supply matching your motors' voltage specifications to the screw terminals. Ensure the polarity is correct (positive to +M, negative to GND). Software Implementation and Libraries